Progressive; Srgb Setting; Projector - Sharp XR-1X Operation Manual

Picture Adjustment ("Picture" menu) (Continued)

Progressive

Menu operation n Page
Q Example: "Picture" screen menu for
INPUT 2 mode
Picture SCR - ADJ
Picture Mode
Contrast
Bright
Color
Tint
Sharp
CLR Temp 7 5 0 0
Bright Boost
Progressive
Reset
SEL./ADJ.
Description of Items
Selectable
items
2D Useful to display fast-moving images
Progressive such as sports and action films.
3D Useful to display relatively slow-
Progressive moving images such as drama and
documentary more clearly.
Film Mode Reproduces the image of film source*
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz
and SECAM to play back a high-definition image.
Note
• In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
• When the image is blurred or noisy, switch to
the optimal mode.
• When using progressive inputs, inputs are di-
rectly displayed so that 2D Progressive, 3D
Progressive and Film Mode cannot be se-
lected.
42

sRGB Setting

38
PRJ - ADJ Help
Standard
0
0
0
0
0
K
Off
3D Progressive
ENTER END
Description
Menu operation n Page
38
Q Example: "Picture" screen menu for
INPUT 1 (RGB) mode
Picture SCR - ADJ PRJ - ADJ
Picture Mode
Contrast 0
Bright 0
Red 0
Blue 0
CLR Temp 7 5 0 0 K
Bright Boost
sRGB
Reset
SEL./ADJ. ENTER
Note
• An international standard of color reproduc-
tion regulated by the IEC (International
Electrotechnical Commission). As the fixed
color area has been decided by the IEC, the
images are displayed in a natural tint based
on an original image, when "sRGB" is set to
"ON".
• For additional information about the sRGB
function, visit "http://www.srgb.com/".
• You cannot set the items, "Red", "Blue", "CLR
Temp", "Bright Boost", when "sRGB" is set to
"On".
Info
• When "sRGB" is set to "On", the projected
image may become dark, but this does not
indicate a malfunction.
Help
Standard
Off
Off
END