Switching the Input Mode
Select the appropriate input mode for
the connected equipment.
PressC INPUT 1, D INPUT 2 or
EINPUT 3 on the remote control to se-
lect the input mode.
• When pressing INPUT (W/Y) on the projector,
input mode switches in order of
INPUT1 INPUT2
INPUT3
• When "Auto Search" is set to "On", INPUT (W/
Y) on the projector functions as the Auto Search
buttons. (See page 47.)
Adjusting the Volume
Press K/L on the remote control or
V/X on the projector to adjust the vol-
ume.
Note
• Pressing K/V will lower the volume.
• Pressing L/X will raise the volume.
Displaying the Black Screen
and Turning off the Sound
Temporarily
Press MAV MUTE on the remote con-
trol to temporarily display a black
screen and turn off the sound.
Note
• Pressing MAV MUTE again will turn the pro-
jected image back on.
.
On-screen Display
On-screen Display
INPUT
buttons
AV MUTE button
Volume buttons
29