Direct Power On Function; Selecting The Transmission Speed (Rs-232C) - Sharp XG-PH70X-N Operation Manual

Direct Power On Function

Menu operation Page
Example: "Options (2)" screen menu
Description of Direct Power On
Selectable items
ON
The projector automatically turns on
when the power cord is plugged into
the AC outlet or the breaker switch is
turned on.
OFF The projector is turned on manually
(see page 37), and does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
56
Description
Selecting the Transmis-
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Menu operation Page
Example: "Options (2)" screen menu
Description of RS-232C
Selectable items
9600 bps
Transmission speed is slow.
38400 bps
115200 bps Transmission speed is rapid.
Note
• Refer to the "SETUP MANUAL" contained on
the supplied CD-ROM for RS-232C Specifica-
tions and Command Settings.
• Refer to the computer's operation manual for
instructions for setting the computer's baud rate.
58
Description
-87