Correcting Trapezoidal Distortion
When the image is projected either from the top or from the bottom towards the screen at an angle, the image
becomes distorted trapezoidally.
The function for correcting trapezoidal distortion is called
There are the two types of the Keystone Correction.
1) "GEOMETRIC ADJUSTMENT" for correcting an image designating the corner of the projected im-
age
2) "H & V KEYSTONE" for designating the correction of the horizontal and vertical axes
Selecting the Type of the
Correction
Select the type of the keystone correction.
Press
on the projector or
remote control.
• "GEOMETRIC ADJUSTMENT" will be dis-
played.
• Each time
or
toggles as follows:
GEOMETRIC
→
ADJUSTMENT
↑
The display
←
disappears.
GEOMETRIC
For correcting an image desig-
ADJUSTMENT
nating the corner of the pro-
jected image
H & V KEYSTONE
For correcting an image desig-
nating the horizontal or vertical
axes
IMAGE RESIZING
For correcting the image dis-
tortion which cannot be cor-
rected with "H & V KEY-
STONE".
*Only when "H & V KEY-
STONE" is set to the values
other than "0", "IMAGE
RESIZING" can be adjusted.
(This function cannot be used
when correcting with "GEO-
METRIC ADJUSTMENT".)
on the
is pressed, the display
H & V KEYSTONE
IMAGE RESIZING *
Keystone
Correction.
KEYSTONE
button
ENTER button
KEYSTONE
button
Mouse/adjustment
button (
'
/
"
/
\
/
|
)
ENTER button
UNDO button
Adjustment
button
('/"/\/|)
UNDO button
-41