Dhcp Client Setting; Tcp/Ip Setting - Sharp XG-PH70X-N Operation Manual

DHCP Client Setting

Connect the LAN cable before turning the pro-
jector on. If not, the DHCP Client function does
not work.
Menu operation Page
Example: "Options (2)" screen menu
Description of DHCP Client
Selectable items
Obtains configuration parameters for
ON
TCP/IP network automatically.
OFF Sets the TCP/IP manually.
Note
• Select "ON" for "DHCP Client". "Obtaining IP
Address..." appears, then the message "The
network settings have been changed.", IP Address,
Subnet Mask and Gateway will be displayed.
• If the DHCP server is not available, "Could not
obtain IP Address." appears.
In this case, set the TCP/IP manually. (See
"TCP/IP Setting" at right.)
58
Description

TCP/IP Setting

Set the TCP/IP manually.
Menu operation Page
Example: "Options (2)" screen menu
1
Select "TCP/IP", then press
2
Enter "IP Address" using '
and \, then press
3
Enter "Subnet Mask" using '
| | | | | and \, then press
58
.
' ' , " ' ' " " , | | | | | " "
.
' ' , " ' ' " " , " "
.
-89