Sharp Notevision XG-PH50X-NL Setup Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. Notevision XG-PH50X-NL
  6. Setup manual
Sharp Notevision XG-PH50X-NL Setup Manual

Sharp Notevision XG-PH50X-NL Setup Manual

Sharp notevision xg-ph50x-nl: setup guide
Hide thumbs Also See for Notevision XG-PH50X-NL:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
Setting up the Screen .......................................... 2
Connecting Pin Assignments .......................... 10
Controlling the Projector via LAN .................... 23
(Version 5.0 or later) ................................... 23
Controlling the Projector (Control) ....................... 24
(Settings & Adjustments) ............................ 25
(Network - General) ................................... 26
(Mail - Originator Settings) ........................ 26
When Connecting Using RS-232C ....................... 28
When Connecting Using Telnet ............................ 29
SETUP MENU (Main Menu) ................................. 30
ADVANCED SETUP MENU ................................. 30
Set Items ............................................................... 31
IP Address Setting ([1]IP Address) ...................... 33
SETUP GUIDE
MULTIMEDIA PROJECTOR
MODEL
XG-PH50X
XG-PH50X-NL
User Name Setting ([4]User Name) ..................... 34
Password Setting ([5]Password) .......................... 34
Stack Projection ................................................. 38
Setting up the Stack Projection ............................ 39
Video Wall Projection ........................................ 41
Troubleshooting ................................................. 50
Dimensions ........................................................ 53
([6]RS-232C Baud Rate) ............................ 34
([D]Disconnect All) ..................................... 35
([A]Advanced Setup) .................................. 35
(ADVANCED[0]Search Port) ...................... 37
Video Wall Setup ........................................ 44

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Notevision XG-PH50X-NL and is the answer not in the manual?

Questions and answers

Related Manuals for Sharp Notevision XG-PH50X-NL

Summary of Contents for Sharp Notevision XG-PH50X-NL

  • Page 1: Table Of Contents

    1. Connecting the Projector to a Computer ... 18 2. Setting an IP Address for the Computer ... 19 3. Setting up a Network Connection for the Projector ... 21 Controlling the Projector via LAN ... 23 Controlling the Projector Using Internet Explorer (Version 5.0 or later) ...

  • Page 2: Setting Up The Screen

    Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Note • The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.

  • Page 3: Screen Size And Projection Distance

    The projection screen size varies according to the distance from the lens of the projector to the screen. The optional lenses from Sharp are also available for specialized application. Please see your nearest Sharp Authorized Projector Dealer to details on all the lenses. (Refer to the lens operation manual when using a lens.) Also, ensure to have service personnel install the optional lenses.
  • Page 4 Screen Size and Projection Distance Standard Zoom Lens (AN-PH30EZ : Standard equipment with XG-PH50X) F1.8-F2.0, f=25.6-31.3 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 300" (762 cm) 610 cm (240”) 457 cm (180") 250" (635 cm) 508 cm (200") 381 cm (150") 200"...
  • Page 5 Fixed Wide Lens (AN-PH10EX) F2.5, f=11.6 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 150'' (381 cm) 305 cm (120'') 229 cm (90'') 100'' (254 cm) 203 cm (80'') 152 cm (60'') 84'' (213 cm) 171 cm (67'') 128 cm (50'') 80'' (203 cm)
  • Page 6 Screen Size and Projection Distance Wide-zoom Lens (AN-PH20EZ) F2.5, f=21.2-25.8 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 250" (635 cm) 508 cm (200") 381 cm (150") 200" (508 cm) 406 cm (160") 305 cm (120") 150"...
  • Page 7 Tele-zoom Lens (AN-PH40EZ) F2.4-F2.5, f=31.9-42.5 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 250" (635 cm) 508 cm (200") 381 cm (150") 200" (508 cm) 406 cm (160") 305 cm (120") 150" (381 cm) 305 cm (120") 229 cm (90") 100"...
  • Page 8 Screen Size and Projection Distance Tele-zoom Lens (AN-PH50EZ) F2.5, f=40.8-62.8 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 250" (635 cm) 508 cm (200") 381 cm (150") 200" (508 cm) 406 cm (160") 305 cm (120") 150"...
  • Page 9 Tele-zoom Lens (AN-PH60EZ) F2.4-F2.5, f=62.1-97.8 mm NORMAL Mode (4:3) Picture (Screen) size Diag. [ χ ] Width Height 250" (635 cm) 508 cm (200") 381 cm (150") 200" (508 cm) 406 cm (160") 305 cm (120") 150" (381 cm) 305 cm (120") 229 cm (90") 100"...

  • Page 10: Connecting Pin Assignments

    Pin No. Signal Name Receive Data Send Data Signal Ground Request to Send Clear to Send Pin No. Signal Pin No. Projector Computer Pin No. Pin No. Pin No. Signal RX– Component Input 1. P 2. Y 3. P 4. Not connected 5.
  • Page 11 DVI digital Terminal (INPUT 3) Connecting Pin Assignments Pin No. Signal T.M.D.S. Data 2– T.M.D.S. Data 2+ T.M.D.S. Data 2 Shield Not connected Not connected DDC Clock DDC Data Not connected T.M.D.S. Data 1– T.M.D.S. Data 1+ T.M.D.S. Data 1 Shield Not connected Not connected +5 V Power...

  • Page 12: Rs-232C Specifications And Commands

    Return code ( Info • When you have more than one command to give to the projector, send each of them only after the re- sponse code for the previous one is received. • “POWR????” “TABN _ _ _ 1” “TLPS _ _ _ 1” “TLPS _ _ _ 2” “TPOW _ _ _ 1” “TLPN _ _ _ 1” “TLTT _ _ _ 1”...
  • Page 13 INPUT 1 Red (-30 - +30) INPUT 1 Green (-30 - +30) INPUT 1 Blue (-30 - +30) INPUT 1 Sharp (-30 - +30) INPUT 1 CLR Temp *1 INPUT 1 Bright Boost (0 - 10) INPUT 1 Progressive : 2D...
  • Page 14 INPUT 2 Red (-30 - +30) INPUT 2 Green (-30 - +30) INPUT 2 Blue (-30 - +30) INPUT 2 Sharp (-30 - +30) INPUT 2 CLR Temp *1 INPUT 2 Bright Boost (0 - 10) INPUT 2 Progressive : 2D...
  • Page 15 INPUT 5 Red (-30 - +30) INPUT 5 Green (-30 - +30) INPUT 5 Blue (-30 - +30) INPUT 5 Sharp (-30 - +30) INPUT 5 CLR Temp *1 INPUT 5 Bright Boost (0 - 10) INPUT 5 Progressive : 2D...
  • Page 16 *2 Because the RS-232C function stops, the projector send no response code. *3 Serial No. Check command is used to read out the 12 digits of serial No.. *4 For setting the projector name, send the commands in order of PJN1, PJN2 and PJN3. Command...

  • Page 17: Setting Up The Projector Network Environment

    Setting up the Projector Network Environment This section describes the basic procedure for using the projector via the network. If the network is already constructed, the projector’s network settings may need to be changed. Please consult your network administrator for assistance with these settings.

  • Page 18: Connecting The Projector To A Computer

    Turn on the computer. Info Confirm that the LINK LED on the side of the projector illuminates. If the LINK LED does not illuminate, check the following : • The LAN cable is properly connected. • The power switches of both the projector and the computer are on.

  • Page 19: Setting An Ip Address For The Computer

    Connections” in the new win- dow. • This manual uses examples to explain the operations in Category View. If you are using Classic View, double-click “Network Connections”. Right-click “Local Area Connec- tion” and select “Properties” from the menu. Setting up the Projector Network Environment...
  • Page 20 Setting up the Projector Network Environment Click “Internet Protocol (TCP/IP)”, and click the “Properties” button. Confirm or change an IP address for the setup computer. 1 Confirm and note the current IP address, Subnet mask and Default gateway. Make sure to note the current IP...

  • Page 21: Setting Up A Network Connection For The Projector

    3. Setting up a Network Connection for the Projector Settings for such items as the projector’s IP address and subnet mask are compatible with the existing network. Start Internet Explorer (version 5.0 or later) on the computer, and enter “http://192.168.150.2/” in “Address”, and then press the...
  • Page 22 • After setting items, wait for 10 seconds and then re-access. This completes the network settings. Change the IP address of the setting computer back to its original address, and then con- nect the computer and the projector to the network.

  • Page 23: Controlling The Projector Via Lan

    Controlling the Projector via LAN After connecting the projector to your network, enter the projector IP address in “Address” on Internet Explorer (version 5.0 or later) using a computer on the network to start a setup screen that will enable control of the projector via the network.

  • Page 24: Confirming The Projector Status (Status)

    Wait for a moment and then operate again. • You cannot operate this page while the pro- jector is warming up. • While the projector is in standby mode, you can only control “Power ON”. • For details about each item, refer to the...

  • Page 25: Setting And Adjusting The Projector (Settings & Adjustments)

    Wait for a moment and then operate again. • You cannot operate this page while the pro- jector is warming up. • While the projector is in standby mode, you can only control “Power ON”. • For details about each item, refer to the projector’s operation manual.

  • Page 26: Making General Settings For The Network (Network - General)

    Note • After setting items, wait for 10 seconds and then re-access. • Projector Name can be up to 12 characters. • You can input the characters below : A-Z, 0-9, -, _, (, ), space (When “a-z” are input, they are converted to “A-Z”...

  • Page 27: To Which E-Mail Is To Be Sent When An Error Occurs (Mail – Recipient Settings)

    A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, |, }, ~ , _, ’, ., @, ` (You can input “@” only one time.) • For details about error items, refer to the projector’s operation manual. Controlling the Projector via LAN...

  • Page 28: Setting The Projector Using Rs-232C Or Telnet

    Setting the Projector Using RS-232C or Telnet Connect the projector to a computer using RS-232C or Telnet, and open the SETUP MENU on the computer to carry out various settings for the projector. When Connecting Using RS-232C Launch general purpose terminal emulator.

  • Page 29: When Connecting Using Telnet

    • If a password has not yet been set, just press the “Enter” key. Input “setup” and press the “Enter” key. • SETUP MENU will be displayed. Setting the Projector Using RS-232C or Telnet ▼SETUP MENU ---------------------------------SETUP MENU-------------------------------- [1]IP Address [4]User Name...

  • Page 30: Setup Menu (Main Menu)

    9600 bps) Baud rate settings for the RS-232C terminals. (Page [7]Projector Name (Factory default setting : XG- PH50X) It is possible to assign a projector name. (Page 34) [A]Advanced Setup Enters ADVANCED SETUP MENU. (Page 35) [D]Disconnect All Disconnect all connections. (Page 35) [V] View All Setting Displays all setting values.

  • Page 31: Controlling The Projector Using Rs-232C Or Telnet

    Controlling the Projector Using RS-232C or Telnet Enter number or symbol of item to be selected on the SETUP MENU. When setting, input the details to be set. Setting is carried out one item at a time, and saved at the end.

  • Page 32: Save Settings And Quit ([S]Save & Quit)

    Controlling the Projector Using RS-232C or Telnet Save Settings and Quit ([S]Save & Quit) Save set values and quit menu. ▼SETUP MENU ---------------------------------SETUP MENU-------------------------------- [1]IP Address [2]Subnet Mask [4]User Name [5]Password [6]RS-232C Baud Rate [7]Projector Name [A]Advanced Setup [V]View All Setting [S]Save &...

  • Page 33: Ip Address Setting ([1]Ip Address)

    Display gateway address after change (*). Note • If the values for IP Address, Subnet Mask or Gate- way of the projector have been changed via Telnet, the computer cannot be connected to the projector depending on the computer’s network settings.

  • Page 34: User Name Setting ([4]User Name)

    2 2 2 2 2 Select and enter the number 0, 1 or 2 and press the “Enter” key. Display set baud rate (*). Note • Set the projector’s baud rate to the same rate as that used by the computer. Projector Name Setting ([7]Projector Name) It is possible to assign a projector name.

  • Page 35: Disconnecting All Connections ([D]Disconnect All)

    Controlling the Projector Using RS-232C or Telnet Setting Auto Logout Time (ADVANCED[1]Auto Logout Time) If there is no input after a fixed time, the projector automatically disconnects network connection using the Auto Logout function. It is possible to set the time until the projector is automatically disconnected in units of a minute (from 1 to 65535 minutes).

  • Page 36: Carrying Out Network Ping Test (Advanced[5]Network Ping Test)

    (ADVANCED[6]Accept IP Addr(1) - [8]Accept IP Addr(3)) It is possible to improve security of the projector by allowing connection from only a prescribed IP ad- dress. It is possible to set up to three IP addresses allowing connection to the projector.

  • Page 37: Setting Of Search Port (Advanced[0]Search Port)

    2 2 2 2 2 Enter “y” and press the “Enter” key. Note • If the values for IP Address, Subnet Mask or Gate- way of the projector have been returned to the default settings via Telnet, the computer cannot be connected to the projector depending on the computer’s network settings.

  • Page 38: Stack Projection

    Info • To set up the stack projection, assign a projector as the master and the other projector as the slave and connect the projectors with commercially available LAN cables (UTP cable, Category 5, cross-over type).

  • Page 39: Setting Up The Stack Projection

    Projector 2: Slave INPUT 1 terminal Set the “Stack Setting” of the pro- jector 1 to “Master”. (See page 84 on the projector operation manual.) Set the “Stack Setting” of the pro- jector 2 to “Slave”. (See page 84 on the projector operation manual.)
  • Page 40 (See page 27 on the projector operation manual.) Connect the OUTPUT (FOR INPUT 1, 2) terminal on the projector 1 to the INPUT 1 terminal on the projec- tor 2 using an RGB cable. (See page 36 on the projector operation manual.)

  • Page 41: Video Wall Projection

    Video Wall Projection Usually, a costly image-processing device is required to set up a video wall projection. This projector has built-in video wall capability that doesn’t require additional equipment. Info • Before setting up the video wall projection, install Internet Explorer (version 5.0 or later).

  • Page 42: Setting Up The Video Wall Projection Basic

    Video Wall Projection Setting up the Video Wall Projection Basic Following is an example of how to build a 2 X 2 video wall using 4 projectors. INPUT 1 terminal Projector 1 INPUT 1 terminal Projector 2 INPUT 1 terminal...
  • Page 43 • “Video Wall” display will appear. Select “2 X 2” on “Division”. 1 1 1 1 1 Selects a position for each projector. (the assigning buttons) 2 2 2 2 2 Selects a number of positions where the video wall is divided.

  • Page 44: Adjusting The Position Horizontally And Vertically

    Assigning the Projected Image on the Video Wall Setup Followings are examples for assigning the projected images for the front and rear projections. Front Projection The numbers of the projector refer to the numbers of the projected positions. Returning to the Default Video Wall Setup Select “1 X 1”...

  • Page 45: Notes On The Wide Video Wall Projection

    To create the wide video wall with three projectors lining up in single file from left to right (as shown above), select “3 X 1” on “Division”, select a position for each projector, and then input the image which width is...

  • Page 46: Setting Up The Video Wall Projection Application

    This part shows an example of a connecting procedure for inputting the video signals to the video wall based on the example in the previous section. INPUT 1 terminal Projector 1: Master INPUT 2 terminals INPUT 4 terminal...
  • Page 47 • Set “Data Port” with the same number for both of the master and slave projectors. (See page 26.) Info • Do not use network software or equipment while it is accessing the projector via the port of the same number used for the master or slave projector, otherwise you cannot properly control multiple projectors with one remote control.
  • Page 48 Video Wall Projection Turn on all of the projectors. Access the projector 1 from the computer via Internet Explorer. (See “Controlling the Projector Using Internet Explorer (Version 5.0 or later)” on page the details.) Click “Stack” on the menu. Select “Master” on “Stack Setting”.
  • Page 49 Repeat the same procedure from the step 10 to 12 for the projector 3 and 4. Select inputs as specified in the table on the right. (See page 86 on the projector operation manual.) Note • Set input terminals you will use to “ON”.

  • Page 50: Troubleshooting

    \ Check that the LAN cable is a Category 5 cable. \ Check that the LAN cable is a cross-over cable when connecting the projector to a computer directly. Check that the LAN cable is a straight-through cable when connecting the projector with a network device such as a hub.
  • Page 51 \ Take the following steps for checking the network settings for the computer. 1. Open a command prompt (MS-DOS Prompt). 98 or 98SE: click “start” ➔ “Programs” ➔ “MS-DOS Prompt” in ® • In the case of Windows order. Me: click “start” ➔ “Programs” ➔ “Accessories” ➔ “MS-DOS ®...
  • Page 52 5. To return to the Windows A connection cannot be made because you have forgotten your user name or your password. \ Initialize the settings. (See page 88 of the projector’s operation manual.) \ After the initialization, carry out setting again.

  • Page 53: Dimensions

    Dimensions Units: inches (mm) Side View Front View Bottom View Rear View Top View (410) (110.1) (94.9) (179) (179) (145.5) (17.5) (77.27) Side View...

  • Page 54: Sharp Corporation

    SHARP CORPORATION 05P01-NA-NM...

This manual is also suitable for:

Xg-ph50x

Table of Contents