Helpful Functions Set During Installation ("Options (2)" Menu); Setting A Password - Sharp XG-PH70X-N Operation Manual

Helpful Functions Set during Installation ("Options (2)" menu)

Setting a Password

There is no factory preset for the password, so
• • • • •
the "Options (2)" menu is enabled.
If you do not want others to operate the "Op-
• • • • •
tions (2)" menu, set a password.
Menu operation Page
Example: "Options (2)" screen menu
1
Select "Password" from the "Op-
tions (2)" menu, and press | | | | | .
2
' ' or " ' ' " " to set the first digit in " "
Press '
"New Password" and then press | | | | | .
3
Enter the remaining 3 digits and
press .
4
Enter the same password in "Recon-
firm" and press
Info
• The password must be entered to use the
"Options (2)" menu when a password has
been set.
-82
58
.
Changing the password
1
' ' ' ' , " " " " " and | | | | | to enter the pass-
Press '
word in "Old Password" and press
.
2
Press ' ' ' ' ' , " " " " " and | | | | | to set the new
password in "New Password" and
press .
3
Enter the same 4-digit password in
"Reconfirm" and press
Note
• If you do not want to set a password, leave the
fields blank in steps 2 and 3 and press
• To cancel the password settings, press
If You Forget Your Password
If you forget the password, delete it using the fol-
lowing procedure and set a new password.
Press
.
.
.
.