Switching The Input Mode - Sharp XG-PH70X-N Operation Manual

Switching the Input
Mode
Select the appropriate input mode for the con-
nected equipment.
Press , ,
the remote control to select the input
mode.
• • • • • When pressing
input mode switches in order of :
INPUT 1 INPUT 2
• • • • • When pressing
input mode switches between "INPUT 4" and
"INPUT 5".
Note
• When no signal is received, "NO SIGNAL"
will be displayed. When non-supported sig-
nal is received, "NOT REG." is displayed.
• When "Auto Search" of the "Options (1)"
menu is set to "ON", the input mode with
signal can automatically be detected and
displayed. (See page 78.)
• The input mode is not displayed when "OSD
Display" of the "Options (1)" menu is set to
"Level A" or "Level B". (See page 75.)
About the Input mode
INPUT 1/ Used for projecting images from
INPUT 2 equipment that sends RGB signals
(RGB/ or component signals connected to
component) the INPUT 1 or 2 terminals.
INPUT 3 Used for projecting images
(digital PC from equipment connected to
RGB/digital the INPUT 3 terminal.
PC compo-
nent/digital
video RGB/
digital video
component)
INPUT 4 Used for projecting images
(video) from equipment connected to
the INPUT 4 terminal.
INPUT 5 Used for projecting images
(S-video) from equipment connected to
the INPUT 5 terminal.
, or on
on the projector, the
INPUT 3
on the projector, the
"On-screen Display of Input Mode (Example)
When pressing
INPUT 1/2/3 mode
Using RGB
* The "INPUT 3"
display is an
example. (When
"Signal Type" is set
to "D. PC RGB")
Using
component
* The "INPUT 3"
display is an
example. (When
"Signal Type" is set
to "D. PC Comp.")
When pressing
INPUT 4 mode
Using video
INPUT 5 mode
Using S-video
When "Auto Search" is set to "ON"
• Pressing or
current input mode.
• Pressing or
automatic input search.
/ / / /
INPUT buttons
.
.
once displays the
again starts the
-45