Helpful Functions Set During Installation ("Options 2" Menu); Setting A Password - Sharp XG-P560W Operation Manual

Helpful Functions Set during Installation ("Options 2" menu)

1 1
2
3
4
5
6
7
8
9
0
q
w
e
r t
y
u

1 1 1 1 1 Setting a Password

There is no factory preset for the password,
• • • • •
so the "Options 2" menu is enabled.
• • • • • If you do not want others to operate the
"Options 2" menu, set a password.
1
Select "Password" from the
"Options 2" menu, and press | | | | | .
2
' ' ' ' or " " " to set the first digit in " "
Press '
"New Password" and then press | | | | | .
3
Enter the remaining 3 digits and
press ENTER.
4
Enter the same password in
"Reconfirm" and press ENTER.
Info
• The password must be entered to use the
"Options 2" menu when a password has
been set.
Menu operation
Changing the password
1
' ' , " ' ' " " " " and | | | | | to enter the pass-
Press '
word in "Old Password" and press
ENTER.
2
' ' ' ' , " " " " " and | | | | | to set the new
Press '
password in "New Password" and
press ENTER.
3
Enter the same 4-digit password in
"Reconfirm" and press ENTER.
Note
• If you do not want to set a password, leave the
fields blank in steps 2 and 3 and press ENTER.
• To cancel the password settings, press UNDO.
If You Forget Your Password
If you forget the password, delete it using the fol-
lowing procedure and set a new password.
Press
projector.
Page 47
on the
-61