Helpful Functions Set During Installation ("Options2" Menu); Setting A Password; If You Forget Your Password - Sharp XG-MB70X Operation Manual

Helpful Functions Set during Installation ("Options2" menu)

Setting a Password

There is no factory preset for the password, so
• • • • •
the "Options2" menu is enabled.
• • • • • If you do not want others to operate the "Op-
tions2" menu, set a password.
Menu operation Page
Example: "Options2" screen menu
1
Select "Password" from the "Op-
tions2" menu, and press
• The screen for entering the password is displayed.
2
' ' ' ' or " " " to set the first digit in " "
Press '
"New Password" and then press | | | | | .
3
Enter the remaining 3 digits and
press .
4
Enter the same password in "Re-
confirm" and press
Note
• The password must be entered to use the "Op-
tions2" menu when a password has been set.
-56
42
.
.
Changing the Password
1
' ' ' ' , " " " " " and | | | | | to enter the
Press '
password in "Old Password" and
press .
2
Press ' ' ' , " ' ' " " " " and | | | | | to set the new
password in "New Password" and
press .
3
Enter the same 4-digit password in
"Reconfirm" and press
Note
• If you do not want to set a password, leave the
fields blank in steps 2 and 3 and press
• To cancel the password settings, press

If You Forget Your Password

If you forget the password, delete it using the fol-
lowing procedure and set a new password.
Press
Note
• If is held down for more than 3 seconds, the op-
eration buttons on the projector will be locked. (See
page 55.)
• You can only use the buttons on the projector to de-
lete the password.
.
.
.
.