Operating With The Remote Control; Selecting The Picture Mode; Switching The Iris Setting; Freezing A Moving Image - Sharp DT 510 - DLP Projector - HD Operation Manual

Operating with the Remote Control

Selecting the Picture Mode

You can select the appropriate picture
mode to best match the projected im-
age you are watching.
Press kPICTURE MODE.
• When pressing kPICTURE MODE, the picture
mode changes in the following order:
Standard Natural
Memory Movie2
Note
• See page 43 for details on the picture mode.

Switching the Iris Setting

This function controls the quantity of
the projected light and the contrast of
the image.
Press lIRIS.
• Each time the button is pressed while the dis-
play is on, the mode is switched in the follow-
ing order:
HIGH BRIGHTNESS MODE
HIGH CONTRAST MODE
Note
• For details on Iris, see page 45.

Freezing a Moving Image

1
Press hFREEZE.
• The projected image is frozen.
Press hFREEZE again to return
2
to the moving image from the cur-
rently connected device.
38
Dynamic
Movie1
PICTURE
MODE button
IRIS button
FREEZE button