Picture Adjustment ("Picture" Menu); Selecting The Picture Mode - Sharp PG-D3010X Operation Manual

Picture Adjustment ("Picture" Menu)

Q PAGE1
Picture SIG
1
Picture Mode
Contrast
Bright
Color
2
Tint
Sharp
Red
Blue
SEL./ADJ.

1 Selecting the Picture Mode

Selectable
items
Standard For standard image
Presentation Brightens portions of image for
more enhanced presentations.
Movie Gives natural tint to the
projected image.
Game Gives sharpness to the
projected image.
*sRGB For high fi delity reproduction of
images from a computer.
• "sRGB" is displayed only when RGB signal is input.
• You can set or adjust each item in the "Picture" menu to your preference. Any changes you make are
retained in memory.
Note
• You can also press PICTURE MODE on the remote control to select the Picture mode. (See page 34.)
• *sRGB is an international standard of color reproduction regulated by the IEC (International
Electrotechnical Commission). As the fi xed color area has been decided by the IEC, the images are
displayed in a natural tint based on an original image, when "sRGB" is selected.
You cannot set the items, "Red", "Blue", "CLR Temp", "BrilliantColor
Info
• When "sRGB" is selected, the projected image may become dark, but this does not indicate a
malfunction.
42
SCR PRJ1 PRJ2 Net.
Standard
0
0
0
0
0
0
0
ENTER END
Description
Q PAGE2
Picture
Picture Mode
3
CLR Temp
2
BrilliantColor
C.M.S. Setting
4
C.M.S.
5
Film Mode
6
DNR
7
Eco+Quiet
Reset
SEL./ADJ.
The default settings of each item when selecting Picture Mode
CLR Temp BrilliantColor
0
0
–1
0
–
Menu operation n Page
SIG SCR PRJ1 PRJ2
Standard
0
TM
1
On
Auto
Level 2
Off
ENTER
TM Eco+Quiet
1
2
0
1
–
TM
", when "sRGB" is selected.
40
Net.
END
Off
Off
On
Off
Off