Replacing The Air Filter - Sharp Notevision XG-C335X Operation Manual

Replacing the Air Filter

• This projector is equipped with air filters
to ensure the optimal operating condition
of the projector.
• Ask your nearest Sharp Authorized Pro-
jector Dealer or Service Center to ex-
change the filter (PFILDA022WJKZ) when
it is no longer possible to clean.
Replacing the Air Filter
1
Press STANDBY/ON on the pro-
jector or STANDBY on the re-
mote control to put the projector
into the standby mode.
• Wait until the cooling fan stops.
2
Disconnect the power cord.
• Unplug the power cord from the AC socket.
3
Remove the filter cover.
• Turn over the projector. Pull down the car-
rying handle (1), grab the tab (2) and slide
open the filter cover (3).
4
Remove the air filter.
• Pick the air filter up with your fingers and lift
it out of the filter cover.
-56
STANDBY button
AC socket
3
2
1
STANDBY/ON
button
Tab