Dhcp Client Setting; Tcp/Ip Setting - Sharp Notevision XG-C335X Operation Manual

9

9 DHCP Client Setting

9
9 9
Connect the LAN cable before turning the pro-
jector on. If not, the DHCP Client function does
not work.
Selectable items
On Obtains configuration parameters for
TCP/IP network automatically.
Off Sets the TCP/IP manually.
Select "On" for "DHCP Client", then press
"Obtaining IP Address..." appears, then the menu
screen appears. Confirm the parameters of IP
Address, Subnet Mask and Gateway on the TCP/IP
screen.
If the DHCP server is not available, "Could not
obtain IP Address." appears.
In this case, set the TCP/IP manually. (See the
item 0.)
0

0 TCP/IP Setting

0
0 0
Set the TCP/IP manually.
1
Select "Off" for "DHCP Client", then
press ENTER.
2
Select "TCP/IP", then press
3
Enter "IP Address" using '
and \, then press
4
Enter "Subnet Mask" using '
| | | | | and \, then press
5
Enter "Gateway" using '
\, then press
Description
.
ENTER
ENTER.
' ' , " ' ' " " , | | | | | " "
ENTER.
' ' , " ' ' " " , " "
ENTER.
' ' ' ' , " " " , | | | | | and " "
ENTER.
Menu operation
Selectable items
IP Address Factory default setting:
192.168.150.002
Enter an IP address appropriate for the
network.
Subnet Mask Factory default setting:
255.255.255.000
Set the subnet mask to the same as
that of the computer and equipment on
the network.
Gateway Factory default setting:
000. 000. 000. 000
* When not in use, set to:
"000. 000. 000. 000".
Note
• Confirm the existing network's segment (IP ad-
dress group) to avoid setting an IP address that
duplicates the IP addresses of other network
equipment or computers. If "192.168.150.002"
is not used in a network with an IP address of
"192.168.150.XXX", you don't have to change
the projector IP address.
• For details about each setting, consult your
network administrator.
Page 42
Description
-53