Setting The System Sound; Selecting The Menu Screen Position; System Lock Function; Options1 - Sharp Notevision XG-C335X Operation Manual

9 9

9 Setting the System Sound

9 9
Selectable items
On A confirmation sound is made when the
projector turns on/off.
Off No confirmation sound is made.
0 0 Selecting the Menu 0
0 0
Screen Position
Select "Menu Position" on the "Options1" menu
and the desired position for the menu screen.
Selectable items
Center Displayed on the center of the image.
Upper Right Displayed on the upper right of the image.
Lower Right Displayed on the lower right of the image.
Upper Left Displayed on the upper left of the image.
Lower Left Displayed on the lower left of the image.
q q q q q

System Lock Function

This function prevents unauthorized use of the
projector. Once this function is activated, users
must enter the correct keycode each time the pro-
jector is turned on. We suggest you record the
keycode in a safe place where only authorized
users have access.
Info
• If you lose or forget your keycode, contact your
nearest Sharp Authorized Projector Dealer or Ser-
vice Center (see page 66). Even if the product war-
ranty is valid, the keycode reset will incur a charge.
Setting/Changing the keycode
1
Select "System Lock" on the "Op-
tions1" menu, then press | | | | | .
• A message is displayed.
• Read this message, and press
• The screen for entering the keycode ap-
pears.
2
Press the 4 buttons on the remote
control or on the projector to enter
the preset keycode in "Old Code".
• When setting the keycode for the first time,
press " on the projector for four times.
Description
Description
ENTER.
Menu operation
" " " " On-screen Display
"
Note
• If you input a wrong keycode, the cursor returns
to the first point of the "Old Code".
• The preset keycode is 4 " buttons on the projec-
tor. If this keycode is set, the keycode input screen
does not appear when turning the power on.
3
Press the 4 buttons on the remote
control or on the projector to enter
the new keycode in "New Code".
Note
• You cannot use the following buttons for
keycode:
• STANDBY/ON button
• ON button
• STANDBY button
• ENTER button
• L-CLICK button
• R-CLICK/RETURN button
• MENU button
• ECO/QUIET button
• BREAK TIMER button
• System lock function recognizes each button
on the remote control or on the projector as
an individual button, even if they share the
same button name. If you used the buttons on
the projector in setting your keycode, the
keycode cannot be canceled with the remote
control.
4
Enter the same keycode in "Reconfirm".
Note
To cancel the keycode that you have al-
ready set
• Press " on the projector for four times in steps
2 and 3 above.
Page 42
-49