Installation Of Wiring - Inca Metal Cutting GALAXY SERIES Installation And Operating Instructions Manual

3.3.1 INSTALLATION OF WIRING

Before installing the fireplace it is critical that your electrician installs wiring for the electrical components
to operate. There is an opening in the rear left for the wires to be run through, (see diagram below), for
connection in the bottom of the firebox.
gas hook up
VIEWED FROM REAR OF FIREPLACE.
IMPORTANT:
MAKE SURE EVERYTHING IS PLUGGED IN BEFORE TURNING
ANYTHING ON.
IF ANY COMPONENTS ARE PLUGGED IN AFTER FIRING UP THE
FIREPLACE YOU MAY BLOW THE FUSES IN THE CONTROL SYSTEMS.
Page 17 of 55