Inca Metal Cutting GALAXY SERIES Installation And Operating Instructions Manual page 37

Step 6
Your installed 4 logs should lay positioned as below.
Step 7
Install the ceramic rocks in an esthetically pleasing pattern, as few or as many as you want. The rocks
may not be placed over any of the burner holes or the vent holes at the front of the burner so they do not
affect the burn pattern in any way.
Step 8
Carefully scatter the glass pebbles over the burner pan. These can go over the burner holes. Make sure
none of the pebbles drop into the pilot assembly hole or down into any of the fans. Do not cover the vent
holes in the front of the burner pan.
Page 37 of 55