3
How to use the device
Line Monitoring
You can check network communication between this station and stations other than VoIP phones registered in this
station's Address Book.
Network communication can also be automatically checked on a periodic basis
only) (→page
156)").
Line monitoring results are also stored on the microSD card.
Performing manual line monitoring
1.
Tap [Status] on the Home screen.
2.
Tap [Line Supervision].
Checking the System
("Supervision (administrator privileges
3.
Enter the administrator password,
and then tap [ENTER].
This password is the same as the administrator
password for Web configuration. Contact your
system administrator for details.
• Once line monitoring begins, the screen
returns to the System Check screen.
If an error was detected, [Status] on the Home
screen turns from green to red.
81