Aiphone IX-MV7-HW Operation Manual page 172

4
Settings and Adjustments
Entry
Call Timeout
*1
Ringback Tone Count
[time(s)]
*1 Indicates a required field. The settings should be entered. Retain the default values, unless a change is necessary.
Note
• When calling a VoIP Phone, this will be the shorter time of the time set for "Call Timeout" and the call duration configured on
the IP-PBX.
■ Call Origination Settings (outgoing call placed by Option Input 1 - 4)
Entry
Ringback Tone
Call Timeout *1
Description
Configure the call timer for calls.
This item lets you define the number of rings for
the calling tone.
Description
Configure the calling tone heard from this
station when making an outgoing call via
contact input.
Configure the call timer for calls.
Configuring the device on a PC
Settings
• 10 - 600 sec: Select
when setting a value
from 10 to 600 sec (by 1
sec).
• Infinite: The outgoing
call continues until the
other person answers.
• 1 - 20 times
• Infinite: The calling tone
continues to play for the
amount of time set in
"Call Timeout."
Settings
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select from the audio
sources registered in
"Custom Sound
Registry (→page
• 10 - 600 sec: Select
when setting a value
from 10 to 600 sec (by 1
sec).
• Infinite: The outgoing
call continues until the
other person answers.
172
Default values
60sec
Infinite
Default values
Call Pattern 4
169)".
60sec