Tier 1 Cru Information; Battery - IBM System x3500 Service Manual

Tier 1 CRU information

Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your
request, you will be charged for the installation.

Battery

To remove the battery, complete the following steps:
1. Read the safety information that begins on page "Safety" on page vii.
2. Turn off the server and all attached devices.
3. Disconnect all external cables and power cords.
4. Remove the left-side cover and bezel (see "Removing the left-side cover and
5. See "System-board internal connectors and switches" on page 8 for the location
6. Remove the battery:
7. Dispose of the battery as required by local ordinances or regulations (see
Installing the battery
The following notes describe information that you must consider when you replace
the battery in the server:
v You must replace the battery with a lithium battery of the same type from the
v To order replacement batteries, call 1-800-426-7378 within the United States, and
v After you replace the battery, you must reconfigure the server and reset the
v To avoid possible danger, read and follow the following safety statement.
60
IBM System x3500 Type 7977: Problem Determination and Service Guide
bezel" on page 57).
of the battery.
a. Use one finger to press the top of the battery clip away from the battery.
b. Lift and remove the battery from the socket.
"Battery return program" on page 172 for information about disposing of the
battery).
same manufacturer.
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call your IBM marketing representative or authorized reseller.
system date and time.