Advertisement
Lap Belt Installation
Always review your vehicle owner's manual for specific information about your
vehicle seat belts.
Grab the sides of the seat at
the belt path and slide the seat
side-to-side and front-to-back.
The seat should not move
more than 2.5 cm (1 inch).
Locking Latch Plate and No
Retractor
When installing the car seat, route the
lap seat belt through the proper path and
buckle it in. Then, pull upwards on the tail
of the belt so that the lap belt gets tight
around the car seat.
Sewn On Latch Plate and ALR
Slowly pull the lap belt all the way
out. Route the vehicle seat lap belt
through the proper belt path and buckle
it in. Then, pull the lap belt tight while
feeding all the slack back into the retractor.
84
Advertisement
