Advertisement
3. Feed the UAS Connector with the Adjuster Closest to it Through
the Chosen Belt Path
Rear-Facing: Make sure the EZ Tight™ UAS strap is in front of the buckle
strap when the buckle is in the inner-most position (A), and in behind when in
the outter-most position (B) and that it is flat and is not twisted.
2. Slide Entire EZ Tight™ UAS
Strap Along Bar to Correct Belt
Path Opening
Rear-Facing: Slide EZ Tight
strap down to the blue label.
Forward-Facing: slide the EZ Tight
UAS strap up to the orange label.
A
72
UAS
TM
TM
B
Advertisement
