Advertisement
9. Extend the EZ Tight™ UAS Strap
Press in and hold on the blue release
button on the EZ Tight™ UAS retractor and
pull the EZ Tight
UAS strap until it is fully
TM
extended.
10. Attach Each EZ Tight
UAS Connector
TM
to Vehicle's Lower UAS Anchors
EZ Tight
UAS strap should lie flat and not
TM
be twisted. If twisted, you will not be able to
tighten the EZ Tight™ UAS.
EZ Tight
UAS can only be used if the
TM
vehicle UAS anchor spacing is 28 cm
(11 inches) from the centre of one UAS
anchor to the centre of the other UAS
anchor.
CLICK!
37
Advertisement
