Advertisement
13. Attach Top Tether Strap
Extend the tether by pressing the grey
button and pulling out on the strap and
attach.
Consult vehicle's owner manual for specific
location.
14. Tighten Top Tether Strap
Remove all the slack.
15. Test For Tightness
Grab the sides of the seat where the EZ
Tight™ UAS strap is and slide the car seat
side-to-side and front-to-back.
If the seat moves less than 2.5 cm (1"), it
is tight enough.
If it moves more than an 2.5 cm (1"),
repeat steps 10, 11, 12, 14 and 15.
See section 5-A to secure your child.
54
Advertisement
