Advertisement
Sliding Latch Plate and ELR
Retractor
A latch plate that slides freely on the belt
webbing and cannot, by itself, hold the belt
snug around a car seat.
With this retractor, you will need to use the
locking clip to lock the vehicle seat belt.
To get a locking clip order online at
gracobaby.ca or call 1-800 345-4109.
Route the vehicle seat belt through the
proper belt path and buckle it in. Pull the
vehicle seat belt tight. While pushing down
on seat, pinch the two straps together
behind the buckle tongue. Unbuckle the
belt without allowing it to slip.
Attach locking clip to lap and shoulder
belts as shown.
Rebuckle belt. Check that lap belt does
not move by pulling hard. If belt loosens
or lengthens, repeat procedure.
Locking Clip
83
2.5 cm (1")
Advertisement
