Download Print this page

Graco Extend2FitTM Platinum Instruction Manual page 70

Advertisement

6-A Accessories
(on select models)
Harness Covers
Make sure that harness covers do not interfere with
placement of the chest clip at armpit level.
To remove, undo the fastening strips and remove.
Head Support
Slide head support into opening in headrest as
shown. Curved bottom of head support allows
for head support to be pulled down to fit smaller
infants.
Body Support
Use only in the rear-facing mode.
Body support must be used if shoulders are below
the lowest harness setting.
Never allow body support to bunch or fold behind
child.
70

Advertisement

loading