Table of Contents
Advertisement
SITRANS WW100
SITRANS WW100 is a high-accuracy, low capacity weighfeeder for minor ingredient
additives.
The unique long length platform weigh bridge mounts directly to a corrosion-resistant
platform load cell. An adjustable mechanical shear gate profiles the material and fixes
the correct material bed depth for a given material application. The belt speed can be
automatically adjusted to attain the correct feed rate. SITRANS WW100 comes with a
weigh bridge, speed sensor, variable frequency drive (if ordered), and calibration test
chain (if ordered). An integrator is required to complete the system.
Safety Notes
Special attention must be paid to warnings and notes highlighted from the rest of the text
by grey boxes.
WARNING means that failure to observe the necessary precautions
can result in death, serious injury, and/or considerable material
damage.
means important information about the product or that part of the operating
Note:
manual.
The Manual
Notes:
•
SITRANS WW100 is to be used only in the manner outlined in this instruction
manual.
•
This product is intended for use in industrial areas. Operation of this equipment
in a residential area may cause interference to several frequency based
communications.
This instruction manual covers the operation, installation, and maintenance of
SITRANS WW100.
Please refer to this manual for proper installation and operation of SITRANS WW100.
Adhering to the installation and operating procedures will ensure a quick, trouble-free
installation and allow for the maximum accuracy and reliability of your weighfeeder.
The drive system for the servo gearmotor of the SITRANS WW100 is a Sinamics S110
control unit. All instruction manuals pertaining to the drive components can be found in
the companion manual appendix on the documentation CD.
If you have any questions, comments, or suggestions about the manual contents, please
email us at techpubs.smpi@siemens.com.
For the complete library of Siemens Milltronics manuals,
go to www. siemens.com/weighing.
7ML19985MN01
SITRANS WW100 - OPERATING INSTRUCTIONS
Page 1
Advertisement
Table of Contents
