Siemens SCALANCE X-200 Operating Instructions Manual page 84

Approvals
Railway approval
The TS variant of the device meets the requirements of the Railway standard EN
50155:2007 "Railway Applications - Electronic equipment used on rolling stock".
Shipbuilding
Note that the approvals for shipbuilding with the SCALANCE XF204-2BA IRT are valid with
all bus adapters, see section "Accessories (Page 20)".
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
(https://support.industry.siemens.com/cs/ww/en/view/27069465)
● "Industrial Ethernet / PROFINET - Passive Network Components" System Manual
(https://support.industry.siemens.com/cs/ww/en/view/84922825)
● "EMC Installation Guidelines" configuration manual
(https://support.industry.siemens.com/cs/ww/en/view/60612658)
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
Note
The test was performed with a device and a connected communications partner that also
meets the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with these
standards, adherence to the corresponding values cannot be guaranteed.
84
WARNING
Operating Instructions, 02/2018, C79000-G8976-C284-12
SCALANCE X-200