Standby Led "Rm" (Yellow Led); Port Leds "P" (Green/Yellow Leds) - Siemens SCALANCE X-200 Operating Instructions Manual

2.3.5

Standby LED "RM" (yellow LED)

You will find the standby LED only on devices with the IRT function.
Note
This LED labeled on the device with "RM" has a dual function. The color of the display
changes depending on the function:
• If the LED is lit green, the redundancy manager function is indicated.
• If the LED is lit yellow, the standby function is indicated.
In Web Based Management (WBM), the LED is labeled differently depending on the
function:
• The redundancy manager function (as shipped) is labeled "RM".
• The standby function is labeled "SB" in the WBM.
The yellow LED indicates the following statuses of the X-200IRT:
LED color LED status
Yellow Lit
Yellow Flashes slowly
Yellow Flashes quickly
- Off
2.3.6

Port LEDs "P" (green/yellow LEDs)

The LEDs of the Ethernet connectors can be lit green or yellow. The meanings of the display
are as follows:
LED color LED status
Green Lit
Yellow Lit
Yellow Flashing
The following statuses of the port LEDs do not exist on devices with the IRT function:
LED color LED status
Green flashes
once per period
Green flashes
three times per
period
Green flashes
four times per
period
SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12
Meaning
The standby function is activated, the switch is in active mode.
The standby function is activated, the switch is in passive mode.
Standby partner lost.
The standby function is not activated.
Meaning
Link exists, no data reception
Link exists, data being received
Device startup. The LED lights up for approximately 6 seconds.
Setting or display of the fault mask
Meaning
Link exists and port in "blocking" status.
In this status, the port only receives management data (no user data).
Link exists and port is deactivated by the management.
In this status, no data is sent or received via the port.
Port exists and is in the "monitor port" status.
In this status, the data traffic of another port is mirrored to this port.
Description of the device
2.3 The LEDs
27