Siemens SCALANCE X-200 Operating Instructions Manual page 7

Names of the devices in these operating instructions
Unless mentioned otherwise, the descriptions in these operating instructions refer to all
devices of the SCALANCE X-200 product line named above in the section on Validity.
In the remainder of the instructions, these will also be referred to as IE switches or also
simply as X-200.
Further documentation
System manuals for SIMATIC NET products
In the system manuals "Industrial Ethernet / PROFINET Industrial Ethernet" and "Industrial
Ethernet / PROFINET passive network components", you will find information on other
SIMATIC NET products that you can operate along with the devices of this product line in an
Industrial Ethernet network.
You will find the system manuals on the Internet pages of Siemens Industry Online Support
under the following entry IDs:
● Industrial Ethernet / PROFINET Industrial Ethernet System Manual
27069465 (https://support.industry.siemens.com/cs/ww/en/view/27069465)
● Industrial Ethernet / PROFINET - Passive Network Components System Manual
84922825 (https://support.industry.siemens.com/cs/ww/en/view/84922825)
Manual Collection "Distributed I/O System ET 200SP"
In the reference manual for the scalable IO system ET 200SP you will find more information
on the bus adapters.
You will find the reference manual on the Internet pages of Siemens Industry Online
Support:
● SIMATIC ET 200SP Manual Collection
(https://support.industry.siemens.com/cs/ww/en/ps/man)
Finding information
To help orientation, there is not only a table of contents but also an Index in the Appendix.
The SIMATIC NET Glossary also provides additional help, see below.
Audience
These operating instructions are intended for persons involved in commissioning networks in
which IE switches are used.
SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12
Preface
7