Siemens SCALANCE X-200 Operating Instructions Manual page 18

Description of the device
2.1 Device views
Device view based on the example of an X202-2P IRT PRO
The following figure describes the individual components of a PRO version of an IE switch X-
200.
Device view based on the example of an XF204
The following figure describes the individual components of an IE switch X-200, flat design.
18
1 Electrical attachments to Industrial Ethernet
2 LEDs for electrical connectors
3 LEDs for optical connectors with diagnostics
LEDs
4 LEDs
• L: Power LED, power supply
• F: Fault LED
• RM:
– green = redundancy manager
– yellow = standby indicator
5 Optical attachments to Industrial Ethernet
6 Connector for the power supply (supplied with
L1, additionally looped through to L2)
7 Connector for signaling contact
8 Power supply for further devices (looped
through from L1 to L2)
9 (on rear of device, not shown in figure): Slot for
the C-PLUG and SET button
1 LEDs
• L: Power LED, power supply
• F: Fault LED
• RM: Redundancy manager
2 Attachments to Industrial Ethernet
3 Connector for power supply
4 Connector for signaling contact
5 (behind the connectors, not shown in figure:)
SET button
6 (on side of device, not shown in figure:) Slot for
C-PLUG
7 LEDs for attachments to Industrial Ethernet
Operating Instructions, 02/2018, C79000-G8976-C284-12
SCALANCE X-200