MAINTENANCE ON CHASSIS AND ENGINE
Checking rear brake fluid level
9.45
Warning
Danger of accidents Brake system failure.
–
If the brake fluid level falls below the bottom of the viewer, this indicates a leakage in the brake system or worn-out brake lin-
ings. Have the brake system checked in an authorized KTM workshop, and do not ride any further.
–
Disconnect spring
–
Loosen nut
–
To adjust the basic position of the foot brake lever individually, loosen nut
screw
accordingly.
Info
The range of adjustment is limited.
–
Turn push rod
position of the foot brake lever.
Guideline
Free play at foot brake lever
–
Hold screw
Guideline
Remaining nuts, chassis
–
Hold push rod
Guideline
301804-10
Remaining nuts, chassis
–
Reconnect spring
.
and with push rod
, turn it back until you have maximum free play.
accordingly until you have free play
and tighten nut
.
and tighten nut
.
.
. If necessary, adjust the basic
3... 5 mm (0.12... 0.2 in)
M8
30 Nm
(22.1 lbf ft)
M6
15 Nm
(11.1 lbf ft)
99
and turn