MAINTENANCE ON CHASSIS AND ENGINE
–
Remove the four screws
ward and set it down.
–
Remove the nuts
–
Remove screws
–
Remove screws
–
Place the handlebar bridge
and tighten screw
Guideline
Screw, steering bridge
–
Mount and tighten screw
Guideline
Screw, steering column, top
–
Mount and tighten screws
Guideline
Screw, steering bridge
100099-10
–
Mount the handlebar support
self-locking nuts
Guideline
Nut, handlebar support
–
Position the handlebar and fix it with the handlebar clamps
screws
.
. Remove the handlebar clamps
and remove the handlebar support
and
.
. Remove the handlebar bridge
onto the steering column in the desired position. Mount
.
.
.
in the desired position using the screws. Mount new
and tighten.
, swing the handlebar for-
with the screws.
.
M8
20 Nm
(14.8 lbf ft)
M20x1.5
25 Nm
(18.4 lbf ft)
M8
20 Nm
(14.8 lbf ft)
M10
45 Nm
(33.2 lbf ft)
. Mount and tighten
79