Table of Contents
Advertisement
CLEANING
–
After rinsing the vehicle with a gentle water spray, allow it to dry thoroughly.
–
Clean and dry the air filter box.
–
Drain the carburetor float chamber.
Warning
Danger of accidents Reduced braking due to wet or dirty brakes.
–
Clean/dry off dirty or wet brakes by careful application of the brakes.
–
After cleaning, take a short ride until the engine reaches operating temperature.
Info
The heat produced causes water at inaccessible positions in the engine and the brakes to evaporate.
–
Push back the protective covers from the handlebar armatures to allow any water that may have entered there to evaporate.
–
After the vehicle has cooled off, oil or grease all moving parts and bearings.
–
Clean the chain. (
p. 82)
–
Treat bare metal parts (except for brake discs and exhaust system) with anti-corrosion materials.
Cleaning and polishing materials for metal, rubber and plastic (
–
Treat all plastic parts and powder-coated parts with a mild cleaning and care product.
Cleaning and polishing materials for metal, rubber and plastic (
–
To prevent electrical problems, treat electric contacts and switches with contact spray.
Contact spray (
p. 179)
x
(
p. 142)
p. 179)
p. 179)
157
Advertisement
Table of Contents
