KTM 450 SX ATV Owner's Manual page 74

MAINTENANCE ON CHASSIS AND ENGINE
–
Loosen nuts
300273-10
–
Remove screws
300274-10
–
Insert tool

Camber gauge (83019014000)
–
Check the camber on both heim joints.
» If marking
–
Turn tool
with the top edge of the A-arm.
–
Remove tool
300277-10
.

with bushings .
 
in the heim joint and clip onto the A-arm.
is not aligned with the top edge of the A-arm:

with the heim joint in steps of 180° until the marking is in line

.

72