KTM 450 SX ATV Owner's Manual page 111

MAINTENANCE ON CHASSIS AND ENGINE
Info
Proceed in the same way on the other wheels if necessary.
–
Position the wheel on the hub.
Info
Note the direction of travel of the front wheels.
Carefully position the wheel on the hub, being careful not to damage the threads
of the screws.
–
Mount wheel nuts
–
Remove the vehicle from the work stand. (
–
Pull the hand brake lever, push the locking pawl
lever. (Figure 301776-10
–
Tighten the wheel nuts crosswise.
Guideline
Wheel nut
300278-10
but do not tighten.

p. 50)
p. 20)
M10x1.25
down and release the hand brake

45 Nm
(33.2 lbf ft)
109