Introduction; Preface - Siemens Simatic Operating Instructions Manual

Introduction

1.1

Preface

Purpose of this documentation
These operating instructions include all information required for configuration, installation,
commissioning and operation of the PN/CAN LINK.
These operating instructions are intended for qualified personnel in the following target
groups:
● Commissioning engineers
● Operating and service personnel
● System integrator
Knowledge required
The following knowledge is required in order to understand the operating instructions:
● Knowledge of programming a SIMATIC S7 controller
● Knowledge in the application of the TIA configuration environment
● Knowledge of working with the PROFINET fieldbus
● In-depth knowledge of the CAN or CANopen communication protocols
● General knowledge in the field of automation technology
● General knowledge of communication networks
Trademarks
SIMATIC
History
Edition
03/2017
03/2018
SIMATIC PN/CAN LINK
Operating Instructions, 03/2018, A5E39895388-AB
is a registered trademark of Siemens AG.
®
Note
First edition
Addition of naming scheme for generated PLC tags;
Minor improvements and additions
1
7