Documentation Guide - Siemens Simatic Operating Instructions Manual

Introduction

1.2 Documentation guide

Naming conventions
The term "PN/CAN LINK" or "device" is used in this documentation instead of the full product
name "SIMATIC PN/CAN LINK".
The term "S7 controller", or "S7" for short, is also used for the SIMATIC S7 controller.
1.2 Documentation guide
Below you will find a list of documents which supplement these operating instructions for the
PN/CAN LINK and which are available on the Internet.
Additional documentation
Subject
Designing interfer-
ence-free controllers
PROFINET
The latest manuals for SIMATIC products are available for download free of charge from the
Internet (https://support.industry.siemens.com/cs/ww/en/ps/man).
The information system of the TIA Portal also helps you configure and program your
automation system and the PN/CAN LINK.
8
Documentation
Function Manual Designing interference-
free controllers
(https://support.industry.siemens.com/cs/w
w/en/view/59193566)
SIMATIC PROFINET System Description
(https://support.industry.siemens.com/cs/w
w/en/view/19292127)
Most important contents
Basics
•
Electromagnetic compatibility
•
Lightning protection
•
Basics
•
Installation
•
Functions
•
Configuration examples
•
SIMATIC PN/CAN LINK
Operating Instructions, 03/2018, A5E39895388-AB