Unpacking And Lifting The Ac Drive; Accessories - Vacon 20 X Installation, Technical And Maintenance Manual

Receipt of delivery
2.2

Unpacking and lifting the AC drive

The weights of the AC drives vary according to frame size. Note the weights of each individual
frame size in Table 3 below.
Frame
®
VACON 20 X drives have undergone scrupulous tests and quality checks at the factory before
they are delivered to the customer. However, after unpacking the product, check that no signs
of transport damage are to be found on the product and that the delivery is complete.
Should the drive have been damaged during shipping, please contact the cargo insurance com-
pany or the carrier in the first instance.
2.3

Accessories

After lifting the converter out, check that the delivery is complete and the following accessories
ar included:
Item
STO terminal connector
M3.5 x 8 TapTite screw
M1-3 Cable clamp
'Product modified' sticker
*
HMI cap
*. Provided only if the drive is delivered with the keypad mounted.
Service support: find your nearest Vacon service center at www.vacon.com
[kg]
MU2 3.4
MU3 6.0
Table 3. Frame weights.
Quantity
1
4
2
1
1
Table 4. Content of accessory bag.
Figure 7. STO connector.
Weight
[lb]
7.5
13.2
Purpose
Six pin black connector (see
Figure 7) to use STO function
Screws for control cable clamps
Clamping control cables
Information about modifications
Closing cap for the HMI connec-
tor
vacon • 16
2