Table of Contents
Advertisement
Administrator Code
Administrator Code
The security functions can only be set up and changed by the administrator of
the machine. To access the security functions, the administrator must enter
the administrator code.
The administrator code has been set to "00000000" at the factory. It is
strongly recommended that the administrator of the machine change
the administrator code to a code that only he or she knows. To change
the administrator code, follow the steps below.
1
Hold down
START KEY] appears in the display.
2
START
Press
Display: [ENTER OLD CODE]
3
Enter the current administrator code.
•
If you are setting the code for the first time, enter 00000000.
•
To clear a mistake, press
4
START
Press
5
Enter the new code that you wish to use (any number from 5 to 8 digits).
6
START
Press
•
Take care not to lose the print-out or forget the code. In the event that you
forget the code and have kept no record, contact your dealer.
•
If [USE ANOTHER CODE] appears, the code you entered is already being
used for one of the other security functions. Enter a different code.
72
SECURE
.
DEL
.
. The code will be printed out.
until [ADMIN CODE SETUP] / [PRESS
.
Advertisement
Table of Contents
