Loading The Document - Sharp FO-IS125N Operation Manual

Sharp facsimile operation manual fo-is125n
Hide thumbs Also See for FO-IS125N:
Table of Contents

Advertisement

Other restrictions
The scanner cannot recognize yellow, greenish yellow, or light blue ink.
Ink, glue, and correcting fluid on documents must be dry before they pass
through the document feeder.
All clips, staples, and pins must be removed from documents before loading
in the feeder. If these are not removed, they may damage the machine.
Documents which are patched, taped, torn, smaller than the minimum size,
carbon backed, easily smudged, or have a slick coated surface should be
photocopied, and the copy loaded in the feeder.

Loading the Document

Up to 30 letter-size sheets, or 5 legal-size sheets, can be placed in the feeder
at once. The sheets will automatically feed into the machine starting from the
bottom sheet.
If you need to send or copy more than the maximum number of sheets,
place the additional sheets gently and carefully in the feeder just before the
last sheet is scanned. Do not try to force the sheets in, as this may cause
double-feeding or jamming.
For large or thick sheets that must be loaded one at a time, insert each
sheet into the feeder as the previous sheet is being scanned. Insert gently
to prevent double-feeding.
1
Adjust the document guides to the
width of your document.
Loading the Document
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fo is125n - b/w laser - all-in-one

Table of Contents