Using the operation panel to select the login method
To use the machine's operation panel to specify whether users must log in by
entering a user number, or by entering a login name and password, follow the
steps below.
♦
The login method cannot be changed if users have been stored for the
currently selected method. To change the login method, first delete all
users and then change the method.
1
Press
•
If the display shows [ENTER PASSWORD] after you press
SECURE
2
Press
, then
3
Press
to select authentication by login name and password, or
to select authentication by user number only.
•
If [FIRST DELETE ALL USERS FOR OTHER METHOD] appears, users
have been stored for the previously selected method. You must first delete
these users using the procedure on page 79.
4
Press
STOP
, then
SECURE
, enter the administrator code and press
until [AUTH. METHOD] appears.
to exit.
User Authentication
until [USER CONTROL] appears.
START
.
77