Table of Contents
Advertisement
Sending a Fax by Automatic Dialing
Using the REDIAL key
To redial the last number dialed on the machine, press
be automatically activated. To fax a document, press
fax tone after the other machine answers.
Automatic redialing
If you use auto dialing (including Direct Keypad Dialing) to send a fax and the
line is busy, the machine will automatically make three redial attempts at
intervals of five minutes.
During this time, [RECALLING] will appear in the display, followed by the
attempt number. You will not be able to dial any other locations while the
message appears.
♦
To clear the message and stop automatic redialing, press
there are multiple fax numbers being automatically redialed, only the
number that was attempted first will appear in the display. To cancel
automatic redialing of a different number, see Checking and canceling
stored fax jobs on page 67.
Under certain conditions, automatic redialing may stop before three redialing
attempts are made.
66
REDIAL
. The speaker will
START
when you hear the
STOP
. If
Advertisement
Table of Contents
