Using Manual Mode - Sharp FO-IS125N Operation Manual

Sharp facsimile operation manual fo-is125n
Hide thumbs Also See for FO-IS125N:
Table of Contents

Advertisement

Using MANUAL Mode

To select MANUAL mode, press
until [MANU] appears in the display.
In MANUAL mode, you must answer all calls (even faxes) by picking up the
machine's handset or an extension phone connected to the same line.
Answering on the machine's handset
Important: If a document is loaded in the machine's feeder, remove it before
performing the steps below.
1
When the machine rings, pick up the handset.
2
If you hear a soft fax tone, wait until the display shows [RECEIVING] and
then replace the handset.
If [RECEIVING] does not appear (or if you have set the Fax Signal Receive
setting to NO (pp. 136, 138)), press
3
If the other party first speaks with you and then wants to send a fax,
START
press
after speaking. (Press before the sender presses their Start
key.)
When [RECEIVING] appears in the display, hang up.
Answering on an extension phone connected to the same
line
1
Answer the extension phone when it rings.
Using MANUAL Mode
RECEPTION
(with no document in the feeder)
START
to begin reception.
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fo is125n - b/w laser - all-in-one

Table of Contents