Table of Contents
Advertisement
2
Select the destination using one of the following methods:
•
If the destination has been stored in a Rapid Key, press the Rapid Key.
•
If the destination has been stored in a Speed Dial number, press
and enter the Speed Dial number.
•
To search for the destination, press
until the name or address appears, and press
3
If you need to specify either of the file options, press
Step 4 below. (Note that settings selected here are temporary. To make
permanent changes, change the settings in the Web page as explained
on pages 49 and 50.)
If you do not wish to change the file options, go directly to Step 6.
4
Press
or
selection for the option as explained below.
•
FILE FORMAT: Select the format of the scanned image file. Press
TIFF or
for PDF.
•
FILE NAME: To use an automatically generated file name for the scanned
file, press
enter the desired name with the letter keys (max. 40 characters), and press
START
.
5
When you have finished configuring the file options, press
until the display shows [PRESS START TO SCAN].
6
START
Press
to begin transmission.
until the desired option appears, and then make a
(AUTO). To assign a custom name, press
Scan to Folder / FTP
, press
SCAN TO FOLDER
START
.
SPEED DIAL
or
and go to
for
(CUSTOM),
or
51
Advertisement
Table of Contents
