Telnet Management Utility; Telnet Management Utility Overview; Various Commands And Usage; Usage Of The Command Line - Samsung MagicLAN SWL-2000N User Manual

7.4 TELNET Management Utility

7.4.1 Telnet Management Utility Overview

In order to browse Telnet management setup, type the command "telnet xxx.xxx.xxx.xxx" in DOS windows
and the TELNET screen will appear as follows. Here, "xxx.xxx.xxx.xxx" represents the IP address of your
destination AP. When you are prompted to type in the password, enter "default" which is preset as a default
password.

7.4.2 Various Commands and Usage

7.4.2.1 Usage of the command line

The user can enter commands in the following form:
Command parameter1 parameter2

7.4.2.2 All possible Commands

show arp
set nid
time settime
logout ver
trace traceon
traceclr broadcast
config stats
bridge restart
setdate ping
log help
traceoff tracelp
disable
71