Table of Contents
Advertisement
4. MagicLAN Installation for Windows NT
4.1 Hardware Installation
Hardware installation procedure for Windows NT is exactly same as the one for Windows 95/98.
Please make a reference of the Windows 95/98 hardware installation section. (Section 3.1)
4.2 Software Installation
4.2.1 When there is no Windows NT Networking installed yet
1. Unlike Windows 95/98, since Windows NT does not support Plug and Play (PnP), you should
add your driver manually. To do so, click on "start" in task bar, go to "Settings", and go to "Control
Panel".
2. Under "Control Panel", double click on Network icon.
3. Since there is no NT networking installed in your system, you may be asked if you want to install NT
networking first. Click on "Yes" button. Next, you may be asked to specify how you access to the network:
modem or LAN. Check the proper selection and click on "Next". In "Network Setup Wizard" box, click
on "Select from list" button.
4. In "Select Network Adapter" box, click on "Have Disk" button.
34
Advertisement
Table of Contents
