Samsung SMART HOME ADAPTER User manual HD39J1230GW • These safety precautions are for owner’s safety and prevention of property damage. Therefore, please read this manual thoroughly before using your product.
Troubleshooting ..............21 Installation of the Smart Home App ....... 4 Setting up the network ............5 Specification of wired/wireless router for the Samsung SMART HOME ADAPTER ........ 6 Downloading the Samsung Smart Home App .... 7 Registering for a Samsung account ........ 7 Downloading the Samsung Smart Home App ..... 8 Registering the product ............ 9...
What is the SMART HOME ADAPTER? The SMART HOME ADAPTER is an optional accessory that is used to enable Wi-Fi and/or run the Samsung Smart Home App on compatible appliances (not included) of Samsung Electronics Co., Ltd. Application of the SMART HOME ADAPTER • Use the SMART HOME ADAPTER for compatible Samsung appliances. Visit Samsung.com for a list of compatible devices. Appliances compatible with the SMART HOME ADAPTER will have a port to accept the adapter...
Installation of the SMART HOME ADAPTER Installation of the Smart Home App Installing the SMART HOME ADAPTER [Setting the network] • Install the adapter at the given position of each Connect the wired/wireless router to the SMART HOME ADAPTER wirelessly. compatible Samsung appliance. • Download the appropriate manual at Samsung.com for each compatible appliance and refer to it for proper installation position. [Registering Smart Home Service] Register on the Smart Home App using your smartphone.
Setting up the network Note • For the certification and cipher type of a wired or wireless router, it is recommended to use WPA/TKIP or WPA2/AES. The SMART HOME ADAPTER does not support a new Wi-Fi certified specification and non-standard Wi-Fi certification type. • The quality of your wireless network connection can be affected by surrounding wireless interference. • If an internet service provider registered the user's PC or MAC address (Identification number) of the modem permanently, the SMART HOME ADAPTER cannot be connected to the Internet. Please contact the internet service provider and inquire about the internet connection process to connect a device (e.g. SMART HOME ADAPTER) to the Internet. • The Internet may not be connected due to a firewall. Please contact the internet service provider and request a solution. • If you have followed what the internet service provider directed but still cannot connect to the internet, please contact the Samsung service center.
Specification of wired/wireless router for the Samsung SMART HOME ADAPTER • Please refer to the user manual for installation of your wired/wireless router. Wired/wireless router • Samsung SMART HOME ADAPTER supports the (supports DHCP server) IEEE802.11 b/g/n(2.4GHz), Soft-AP method LAN port on the communication protocol. wall (Samsung Electronics recommends use of IEEE802.11n.) • If the wired/wireless router is not a Wi-Fi certified product, it may not connect to the SMART HOME ADAPTER. LAN cable...
Downloading the Samsung Smart Home App Registering for a Samsung account • Before using the Samsung Smart Home App, register for a Samsung account. Note • If an auto-login is not set, the Samsung Account screen will appear during the initial setup. Samsung account login screen(iphone)
Downloading the Samsung Smart Home App • You can download the Samsung Smart Home App by searching "Samsung Smart Home" on Google Play store, Galaxy Apps and iPhone App Store. Note • Samsung Smart Home App supports android operating system 4.0(ICS) or higher and is optimized for Samsung Smart phones (Galaxy S or Note series). If you run the App using a Smartphone manufactured by other companies, some functions may operate differently. • For iPhone users, iOS7 or higher is supported by the app. • Samsung Smart Home App is subject to changes and updates without notice for product improvement purposes.
Registering the product Android 1 Search(a) or select(b) the • Before using the Samsung Smart Home App, register user's country and press the product for Samsung Smart Home Service. the Save button.
2 Select the icon for the 3 Enter(c) the password compatible appliance to of the wireless router be registered. which will be connected and then press the Next button. – If you want to change the connected router, press the icon(d) and select the name of the wireless router. Note • When the guidance screen for changing the network setting appears, uncheck the box that says 'Smart network switch'.
4 Set the compatible Samsung appliance according to the guidance on the screen. 5 Network setting is configured automatically. 6 When the product registration is complete, the main screen of the Samsung Smart Home App appears. – The icon for the connected appliance will be activated on the main screen.
1 Run Samsung Smart Home App. 2 Enter(a) the Samsung account and then press the Sign in button. – However, iPhone users may need to perform the login process each time they use the App since their login information is not automatically saved. 3 Search(b) or select(c) the user's country and press the Save button.
4 Press the Yes button to register the product to Samsung Smart Home services. 5 Enter(d) the Samsung account and then press the Sign in button. – Use the same account as the account which was used for the initial login. 6 Select the icon for the connected appliance that is...
7 Confi gure the connected appliance according to the guidance on the screen. 8 Run the Settings app on your Smartphone. 9 Activate(e) Wi-Fi and then select the connected Samsung appliance.
10 Enter(f) the password "1111122222" and then press the Join button. 11 Run the Samsung Smart Home App on your Smartphone. 12 Press the Next button on the AP mode setting screen.
13 Enter(g) the password of wireless router which will be connected and then press the Next button. – If you want to change the connected router, press the icon(h) and select the name of the wireless router. 14 When the product registration is completed, the main screen of the Samsung Smart Home App appears. – The icon for the connected Samsung appliance will be activated.
Specification Open Source Announcement The software included in this product contains open source Dimensions 79.5 x 28.1 x 10.7 mm software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product Weight 16 g by sending an email to mailto:firstname.lastname@example.org. It is also possible to obtain the complete corresponding source Power consumption Maximum 2.0 W code in a physical medium such as a CD-ROM; a minimal charge will be required. Wireless LAN protocol IEEE 802.11b/g/n (2.4 GHz) The following URL http://opensource.samsung.com/opensource/ Dongle/seq/0 leads to the download page of the source code made available and open source license information as related to this product. This offer is valid to anyone in receipt of this information.
Safety information These safety precautions are for the owner’s safety and prevention of property damage. Therefore, please read this manual thoroughly before using your product. The manufacturer is not responsible for any injury or property damage occurred by not following the safety information. This product is for compatible Samsung appliances, and it will not work on other devices. Visit Samsung.com for compatible appliances. • If the product is getting hot, stop using it. – Burning of skin may occur if skin is in contact with a hot device. • Do not put the product near or in a heater(stove, microwave, etc.), a cooking utensil or a high pressure vessel.
• Do not use the product for purposes other than what is described in this manual and/or the manuals of the compatible appliance. • Leave the product in a dry place without moisture or humidity. – Humidity or liquid may cause damage to the parts and circuits of the product. – If the product gets wet, remove moisture and allow it to dry before connecting it to a compatible Samsung appliance and then bring it to a Samsung service center.
• Do not attempt to repair, disassemble or modify the product yourself. – If a user attempts to repair, disassemble or modify the product, regular service cannot be guaranteed. • Be careful when cleaning the product. – Clean the product with a soft cloth. – Do not use harsh chemicals or detergent for cleaning the product. Doing so may cause product discoloration or corrosion. • This equipment is a EMC device for home use (B grade), and it is intended primarily for use in all areas of the home.
Troubleshooting Download The Samsung Smart Home App cannot be searched on Google Play store, GALAXY Apps or iPhone App Store. Samsung Smart Home App supports android operating system 4.0(ICS) or higher, and iOS 7 or higher for iphone. Sign in Samsung account cannot be accessed. Check your ID and password on the Samsung account screen.
Connection After installing the Samsung Smart Home App, the compatible Samsung appliance cannot be connected to the App. Unplug the appliance and plug in it again, and then reconfigure the Samsung Smart Home App and Wi-Fi again according to the guidance in the manual. The failure message appears when the device is being added to the Samsung Smart Home App. The connection may fail due to the distance from the wireless router installed or other factors which is a temporary occurrence. Try again after a while. If the problem persists, unplug the SMART HOME ADAPTER and plug it again. Function The control function of Samsung Smart Home App does not work.
(Name and signature of authorised person) * This is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the warranty card or contact the retailer where you purchased your product.
La operación de este equipo está sujeta 44580/SDPPI/2016 a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no 1151 cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Complies with This device complies with part 15 of the FCC Rules. IDA Standards Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and DA100790 (2) This device must accept any interference received, including interference that may cause undesired operation. This telecommunication equipment conforms to NTC technical requirement...
Any changes or modifications to the equipment not This equipment generates, uses and can radiate radio expressly approved by the party responsible for frequency energy and, if not installed and used in compliance could void user’s authority to operate the accordance with the instructions, may cause harmful equipment. interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause This equipment has been tested and found to comply harmful interference to radio or television reception, with the limits for a Class B digital device, pursuant which can be determined by turning the equipment to part 15 of the FCC Rules. These limits are designed off and on, the user is encouraged to try to correct the to provide reasonable protection against harmful interference by one or more of the following measures: interference in a residential installation.
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Note This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to insure compliance. This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: (12 months Parts and Labor)