Table of Contents
Advertisement
23.
In "Microsoft TCP/IP Properties" box with Routing tab selected, make sure if "Use IP
Routing" is checked only if you want NT to play a role of router in your network. Click on "OK".
24.
When TCP/IP properties are set, click on "Close". Then "System Setting Change" box will
appear as follows. Click on "Yes" to restart your computer so that the whole installation procedures take
effects.
4.2.2 When There is Windows NT networking already installed
1. Unlike Windows 95/98, since Windows NT does not support Plug and Play (PnP), you should
add your driver manually. To do so, click on "start" in task bar, go to "Settings", and go to "Control
Panel".
2. Under "Control Panel", double click on Network icon.
44
Advertisement
Table of Contents
