Table of Contents
Advertisement
Menu functions
5
Menu functions
The functions in the menus can be called up from various screens. Each function has various
possibilities in the appropriate drop down menu. Any function which is grey is not available.
This chapter describes the functions currently available.
File
Presets
Open
Store and continue
Store and change
Store and quit
Copy
Delete
Delete WS
Transfer
Activate hardcopy
Print
Finish
© Siemens AG 1993 All Rights Reserved
WS 720 A (BN - COM 720 description)
Diagnosis
Info
After selecting "Open" the dialog box will appear showing the
contents of the machine file
The current data group will be stored without leaving the editor.
The current data group will be stored,the editor function is de-
selected and the system returns to the screen for selection of
"Processing branch".
he current data group will be stored,the editor function is de-
selected. Furthermore the machine file is closed and the screen
for "Open machine file" is selected.
− Copy the selected machine file
− Copy the selected data group from the current machine file to
another machine file
− Delete the current machine file
− Delete the current data group
− Delete the part programs stored on the WS module
Move the part programs or machine data between the COM 720
software and the WS module.
With this function active, the current screen can be printed out
Œ
by pressing
.
Print out of the machine file (in preparation).
Leaving the COM 720 software whereby all data will be stored
and the machine file will be closed.
6ZB5 440-0RV02
10.99
5 - 1
Advertisement
Table of Contents
